Cupertino, Santa Clara County
Electrician in Cupertino, CA
Cupertino incorporated in 1955, and most of its housing went up around 1960 as the orchards between Stevens Creek Boulevard and the foothills were subdivided. Monta Vista was the first tract.
Free estimate →Discuss your project
Tell Us About Your Project
Choose a service, enter the project city, and share any details that may help us understand the work. You can edit these fields before sending the form.
Serving homes and businesses in the San Francisco Bay Area and Santa Cruz.
(650) 550-0719Fox Electric is the marketing name of Fox Global Holdings LLC. CSLB #1145945, C-10.
Why Cupertino's 1960 tract homes run out of panel space
Cupertino incorporated in 1955, and most of its housing went up around 1960 as the orchards between Stevens Creek Boulevard and the foothills were subdivided. Monta Vista was the first tract. Rancho Rinconada followed with small Stern and Price houses that shipped with four breakers for the entire home, two 15 A and two 20 A. The Fairgrove tract added about 224 Eichlers with post-and-beam roofs, radiant slab floors and no attic to fish wire through. Those houses were wired for a 1960 household, and today the same houses are asked to charge an EV, run a heat pump and cook on induction. Fox Electric, a C-10 contractor based in San Carlos (CSLB #1145945), handles the whole sequence for Cupertino homeowners: the CEC 220 load calculation the city requires with every charger permit, the PG&E Your Projects application that every panel change-out needs, the Accela instant permit the Building Division issues online for a same-location panel upgrade up to 200 A or a Level 1 or 2 charging station, and the inspection booked through the same portal. Cupertino is PG&E territory with Silicon Valley Clean Energy as its power supplier, so rebates come from PG&E and SVCE rather than from a city utility, and the Silicon Valley Power smart-panel rebate that applies next door in Santa Clara does not apply here.
Electrical project resources for Cupertino
Cupertino publishes a limited residential instant-permit route with restrictions tied to property type, equipment location, service size, historic status, and homeowners association involvement. Projects outside those limits follow the standard permit process. The eligibility details were available through the city's indexed page while direct retrieval was blocked, so confirm the current criteria on the official permit site before applying.
Check the property, location, and size restrictions before relying on the city's streamlined residential route.
Find the standard permit path, forms, and current city contact information if the project does not qualify.
Official source checked September 12, 2026.
Cupertino services
Electrical Panel Upgrades in Cupertino
Local planning details and official resources for this service. →
EV Charger Installation in Cupertino
Local planning details and official resources for this service. →
Whole-House Rewiring in Cupertino
Local planning details and official resources for this service. →
Electrical Troubleshooting & Repair in Cupertino
Local planning details and official resources for this service. →
LED Lighting Upgrades in Cupertino
Local planning details and official resources for this service. →
Emergency Electrical Repair in Cupertino
Local planning details and official resources for this service. →
Cupertino neighborhoods
Monta Vista
Cupertino's first housing tract, developed in the mid-20th century and annexed piece by piece until 2004; detached 1,200 to 2,800 sq ft ranch houses that usually still carry the service size and panel location they were built with.
Rancho Rinconada
1950s Stern and Price 'Miracle House' tract of small single-story homes built with only four breakers for the whole house, two 15 A and two 20 A; annexed in 1999, and many original houses have since been replaced by much larger ones on the same lots.
Fairgrove
Eichler tract of about 224 homes built in 1960 and 1961 between Stevens Creek Boulevard, Miller Avenue, Bollinger Road and Lawrence Expressway; post-and-beam roofs with no attic and radiant slab floors, so new circuits run in the roof structure, along walls or in surface raceway rather than through an attic.
Garden Gate
One of the subdivisions built in the postwar boom alongside Fairgrove, Monta Vista and Seven Springs; single-story tract houses from around 1960 where the original panel is usually on the garage or side wall and has no spare breaker positions.
Seven Springs
Planned neighborhood at the southwestern tip of the city, developed in the late 1980s; panels from that era usually have the space and rating for an EV circuit, so the work is a load calculation and a circuit run rather than a service change.
Oak Valley
The newest and most northwestern neighborhood, developed around the turn of the millennium next to Rancho San Antonio; modern services, so charger work is usually a dedicated 240 V circuit rather than a panel change.
ZIP codes: 95014, 95015
Cupertino rebates
checked September 6, 2026, PG&E Residential EV Charging Rebate
checked September 6, 2026, SVCE FutureFit Homes add-on rebates
Check the program website for current availability, eligibility, and application requirements before including an incentive in your budget.
Why Fox Electric
Match the Scope to the Property
A house, condominium, and small commercial space can have different access, ownership, and approval requirements.
Permit coordination for Cupertino
We confirm the project address, proposed work, and current local instructions before identifying the applicable permit and inspection steps. Utility participation is scoped separately when the project requires it.
Licensed C-10 Electrical Contractor
Fox Electric · Fox Global Holdings LLC · CSLB #1145945
Cupertino Electrical Questions
Does Cupertino issue EV charger and panel permits instantly?
Cupertino offers an Instant Permit path for qualifying residential electrical work. Confirm that the exact scope and property meet its current eligibility rules; a different application path may apply to a relocated panel, an HOA property or other special conditions.
What does a Cupertino electrical permit cost in 2026?
Confirm the current Cupertino fee schedule against the work being proposed. Service equipment, a charger and a whole-house rewire can have different fee categories, and issuance or other charges may be added to the itemized work.
Who disconnects the power for a panel change in Cupertino?
PG&E coordinates the utility side of a Cupertino service change. Submit the proposed meter work through Your Projects and confirm the approval, city inspection and reconnect sequence. Do not schedule the outage from an assumed average review time.
Are there rebates for Cupertino homeowners?
Check programs offered to your PG&E and Silicon Valley Clean Energy account. Silicon Valley Power is a different utility serving Santa Clara, so its incentives should not be assumed to cover a Cupertino address. Confirm equipment, project and income eligibility before budgeting a rebate.
Can you add circuits in a Fairgrove Eichler without an attic?
Yes, but the routing is different. Eichlers are post-and-beam with radiant slab floors and no attic, so new circuits run through the roof structure, along exterior walls, or in surface raceway. Cupertino's instant permits exclude Eichlers only for re-roof, siding and SolarApp work, so the electrical panel and charging station permits follow the normal instant path.
Get in Touch
Electrician in Cupertino
Choose a service, enter the project city, and share any details that may help us understand the work. You can edit these fields before sending the form.
Ask about the scope and fee for an assessment, diagnosis, or inspection before booking.
(650) 550-0719Related electrical guides
Continue with a guide that addresses the next planning decision.
How We Work
Electrical Permits in the Bay Area: Who Pulls Them?
Permit rules depend on the project address and scope. Learn how contractor and owner-builder permits differ, what to put in the contract, and what approval proves.
Read the guide
EV Charging
Can a 100-Amp Panel Handle an EV Charger?
A 100-amp label is a starting fact. Demand, equipment condition, circuit space, and charging needs determine the installation.
Read the guide